page 1 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rf switch with internal driver single supply voltage, +2.3v to +5.5v high power JSW2-63VHDRP+ case style: mt2140 the big deal ? high power handling, 2.5w @2 ghz ? high iip3, +75 dbm ? low insertion loss, 0.4 db ? fast switching, 2s ? tiny size, 2x2mm product overview mini-circuits JSW2-63VHDRP+ is a refective symmetric mmic spdt switch with an internal cmos driver designed for wideband operation from 5 to 6000 mhz. this model provides power handling up to 2.5w with low insertion loss, high dynamic range, and fast switching speed in a tiny 2x2mm 12-lead mclp package. JSW2-63VHDRP+ operates on a single positive supply voltage with low current consumption of just 120a. produced using a silicon-on-insulator process, it provides a high level of esd protection and excellent repeatability. the switching logic for this model sets the switch from com to rf1 with control voltage in the low state and com to rf2 with control voltage in the high state. alternative model (jsw2-63vhdrg+) is also available with opposite switching logic for your convenience. key features feature advantages wideband, 5 to 6000 mhz one model can be used in many applications, saving component count. also ideal for wideband applications such as military and instrumentation. high power and low loss ? 2.5w power handling @ 2 ghz ? 0.4 db insertion loss supports applications with a range of power requirements with excellent trans - mission of signal power from input to output. high isolation ? 68 db at 100 mhz ? 20 db at 5000 mhz high isolation signifcantly reduces leakage of power into off ports. high linearity, ? +75 dbm iip3 ? +115 dbm iip2 high linearity minimizes unwanted intermodulation products which are diffcult or impossible to flter in multi-carrier environments, or in the presence of strong interfering signal from adjacent circuitry or received by antenna. built-in cmos driver eliminates the need for an external driver, saving pcb space and cost. tiny size, 2 x 2mm qfn package tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the pcb. spdt rf switch
page 2 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com product features ? high power, 2.5w at 2 ghz ? low insertion loss, 0.4 db typ. at 3 ghz ? high iip3, 75 dbm typ. from 100-6000 mhz ? low current consumption, 120 a typ. ? immune to latch up typical applications ? defense ? communication infrastructure ? test and measurements general description JSW2-63VHDRP+ is a high power refective symmetric spdt switch with integral cmos driver, operates with single positive supply voltage while consuming, 120 a typical. it has been designed for wide band operation. it is packaged in a tiny 2x2 mm, 12-lead package and is rated msl1 and passes 1kv for esd (hbm). JSW2-63VHDRP+ rev. a m161454 JSW2-63VHDRP+ rs/cp 180329 50 ? 5 - 6000 mhz case style: mt2140 simplified schematic and pad description rf switch with internal driver single supply voltage, +2.3v to +5.5v function pad number description rf com 5 rf common/ sum port* rf1 8 rf out #1 / in port* rf2 2 rf out #2 / in port* control 10 cmos control in ls 11 connect to pad 12 via r1, connect to ground via r2 vdd 12 supply dgnd 9 digital ground gnd 1,3,4,6,7, paddle rf ground *must be held at 0vdc. if required, add dc blocking capacitors to prevent dc on these ports. high power spdt rf switch +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rf electrical specifcations 1 , t amb =25c, v dd = +2.3 to +5.5v, 50 ohms parameter condition (mhz) min. typ. max. units frequency range 5 6000 mhz insertion loss 2,4 (on state) 5 - 100 0.23 db 100 - 1000 0.25 0.35 1000 - 2000 0.3 0.4 2000 - 3000 0.4 0.5 3000 - 4000 0.5 0.7 4000 - 5000 0.65 0.9 5000 - 6000 0.9 1.25 isolation between common port and rf1/rf2 ports 5 - 100 68 db 100 - 1000 42 44 1000 - 2000 33 35 2000 - 3000 27 29 3000 - 4000 22 24 4000 - 5000 18 20 5000 - 6000 15 17 isolation between rf1 and rf2 ports 5 - 100 61 db 100 - 1000 40 41 1000 - 2000 32 33 2000 - 3000 26 28 3000 - 4000 22 24 4000 - 5000 18 20 5000 - 6000 15 16 return loss 4 (on state) 5 - 100 33 db 100 - 1000 28 1000 - 2000 21 2000 - 3000 20 3000 - 4000 18 4000 - 5000 16 5000 - 6000 13 2nd harmonic 5 +18 dbm pin, 17-204 mhz -92 dbm +32 dbm pout, 850/900 mhz -99 +32 dbm pout, 1800/1900 mhz -101 3rd harmonic 5 +18 dbm pin, 17-204 mhz -125 dbm +32 dbm pout, 850/900 mhz -93 +32 dbm pout, 1800/1900 mhz -87 iip2 5 96 17 105 dbm 100 - 6000 115 iip3 5 75 17 81 dbm 5 - 6000 75 input 0.1db compression point 3 5 - 100 33 dbm 100 - 6000 34 ja 119 c/w notes: 1. tested on mini-circuits test board tb-948+ (see characterization test circuit, fig.1). 2. insertion loss values are de-embedded from test board loss. 3. 0.1db compression is a linearity measure and not meant for continuous operation. see figure 2 for max operating power. 4. insertion loss and return loss are improved by external matching. spdt rf switch JSW2-63VHDRP+
page 4 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com switching specifcations parameter condition min. typ. max. units switching time 50% control to 90% rf or 10% rf 2 4 sec video feed-through (control 0 to 1.5v, rf freq.=10 khz, v dd =3.3v) 26 mv p-p dc electrical specifcations parameter min. typ. max. units supply voltage, v dd 2.3 3.3 5.5 v supply current 120 200 a control voltage low 0 0 0.5 v control voltage high 1.2 1.5 3.3 v truth table (state of control voltage selects the desired switch state) state of control voltage rf common to rf1 rf2 high off on low on off on- low insertion loss state off- isolation state absolute maximum ratings 5 parameter ratings operating temperature -40c to +85c storage temperature -65c to 150c v dd , supply voltage +2.3 to 5.5v voltage control 0v min., 3.3 m ax. rf input power, cw 5-100 mhz 33 dbm 100-6000 mhz 34 dbm 5. operation of this device above any of these conditions may cause permanent damage. figure 1. block diagram of test circuit used for characterization (dut, r1&r2 soldered on mini-circuits tb-948+) r1=2.21k ? r2=3.32k ? (can be omitted if v dd =2.3 to 3.3v) note: c block is required only when dc is present on rf ports. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 5 50 500 5000 input power (dbm) mhz power derating (over - 40 to 85 c), 50 ohms typ p1db max rf p0.1db characterization / application circuits power (over-40 to 85c) 50 ohms figure 2. max rf( operating), p 0.1db (typ) and p 1db (typ) vs frequency. spdt rf switch JSW2-63VHDRP+
page 5 of 5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com esd rating human body model (hbm): class 1c (pass 1000v) in accordance with mil-std-883, method 3015 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d additional detailed technical information additional information is available on our dash board. to access this information click here performance data data table swept graphs case style mt2140 plastic package, exposed paddle tape & reel standard quantities available on reel f108 7 reels with 20, 50, 100, 200, 500, 1000, 3000 devices suggested layout for pcb design pl-505 evaluation board tb-948+ environmental ratings env84 product marking jv 12 1 additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp spdt rf switch JSW2-63VHDRP+
|
